XZJ5250TDYD5 Multifunction DustSuppression Vehicle
1)Efficient operation
The dustsuppression device shall be produced by well-known brands in China, with largemist quantity, large range of grain size and good effect for dust particle withmultiple dimensions. Compared with the products at the same level, the fog gunis provided with a long spray distance. Moreover, the pitching angle isadjustable, capable of meeting the demands of different working conditions. Itis driven by motor, with high transmission efficiency.
2) Rich functions
This producthas rich functions, including dust suppression and all functions of thewatering cart. Therefore, it has a variety of functions (including “watering”and “dust suppression”). The dust suppression system can be used for spraying,for the purpose of wet type dust falling. Besides, it can also be used forwater spraying and cooling at various public places (e.g. sports field).Moreover, it can also be used to spray pesticides for vegetation insectskilling and to spray deodorant for deodorization of waste yard.
The wateringsystem has all functions of the watering cart. The sprinkler has a variety oftypes. A duck-mouth nozzle or a round-head nozzle is installed in front, acylindrical sprinkler mound at rear and a shower nozzle on the side, capable offront washing and rear watering. Besides, a rear working platform is providedas well, on which a sprinkler gun is installed. It is adjustable among directflow, heavy rain, intermediate rain, drizzle and fog. The sprinkler gun canalso be used for pesticide spraying, and can be rotated by 360°, whichextremely enhancing the vehicle applicability and improving the use ratio.
3) Convenient use
(a) Few blocking faults The water pipeline isprovided with multiple filter devices. Coarse filter is combined with refinedfilter, minimizing the blocking probability of pipeline, nozzle and water pump.
(b) Convenient water filling The water pump isprovided with the function of self-suction and the filter screen protection,capable of pumping in and out and wild water filling. A fire fighting couplingis provided at various water filling ports of the pipeline. Water can be filledfrom the fire water pipeline. The cover of the tank can be opened and closedfreely, making the water pipe fill water into the tank.
4) Fine design
(a) The tank body is made of high-performancesteel plate. The tank inside is separated into a cabin by baffle. Duringdriving, start and stop of the vehicle, it can effectively reduce the impactcaused by the liquid in the tank.
(b) The water tank is provided with a meteringpipe, so as to check the water volume of the tank and effectively avoidmisoperation caused by insufficient water.
(c) The water tank is provided with anoverflow device. It is capable of timely overflow and avoiding overloading incase of excessive water filling.
(d) A closing cover is arranged at the upperend of the water tank, which is used for direct water filling or for theoverhaul personnel to go in and out of the tank. It is used in combination witha ladder, making it convenient for climbing.
(e) The vehicle is provided with a low waterlevel alarm device. When the water level is lower than the required position,the controller will interrupt the water pump automatically, give a audible andvisual alarm reminder, thus making sure that the water pump will not be damageddue to no-water idling.
Items | Contents | Parameter |
Chassis | Model | DFL1250A13 |
Engine standard model / power | ISD245 50/180kw | |
Dust suppression system | Gun range | ≥120m |
Fog shot height | ≥30m | |
Spray flow | 100~400 L/min | |
The droplets | 20~200 um | |
Pump pressure | 0.8~2.0 MPa | |
Fog pitching angle | -10°~50° | |
Fog gun angle | ±120° | |
Fog working noise | ≤90 dB | |
Low pressure sprinkler system. | Front flush width | ≥24m |
Sprinkler width | ≥16m | |
Post green spray width | ≥14m | |
Rear gun range | ≥38m | |
Clean water flow | 400~600 L/min | |
The actual volume of water tank | ≥14 m³ | |
Driving performance | Maximum speed | 90 km/h |
Max. climbing angle | 30% | |
Braking distance | ≤10m | |
Minimum turning diameter | 19m | |
Quality parameter | Curb mess | 16220kg |
Total mess | 25000kg | |
Vehicle structure and size. | L.W. H | 11055×2500×3946mm |
Wheelbase | 4350+1300 | |
Approach angle | 24° | |
Departure angle | 10° | |
Minimum ground clearance | 250mm | |
Sprinkler quantity | 100 | |
Rotary mode of sprayer | Worm gear + mechanical self - lock. | |
Left and right watering device | √ | |
Sprinkler arrangement | Double loop layout | |
Spray system driving mode | The auxiliary engine drives the generator set |